Windows 10 Download Been At 11 For 30 Minutes

Posted on
  1. Windows 10 Download Been At 11 For 30 Minutes 2
  2. Windows 10 Download Been At 11 For 30 Minutes Video
  3. Windows 10 Download Been At 11 For 30 Minutes 1
Languages: EnglishPortuguêsEspañolFrançaisDeutsch日本語

Summary :

Windows 10 System Restore sometimes gets stuck on restoring files or hung up on initializing while trying to revert a computer to a previous state or restore point. Here we will discuss the solutions to this issue, and the best alternative to the Windows System Restore tool - MiniTool ShadowMaker.

Between 10 and 20 minutes. It may take between 10 and 20 minutes to update Windows 10 on a modern PC with solid-state storage. The installation process may take longer on a conventional hard drive. Besides, the size of the update also affects the time it takes. An internet connection to download the tool and the Windows 10 image. Internet service provider fees may apply. Sufficient data storage available on the computer you are clean installing. Note that the download and image is over 3GB. Check these things on the PC where you want to clean install Windows 10. Last Updated on January 11. My Windows 7 Pro has been re-booting every 5-10 minutes since I started the upgrade a day and a half ago. You download the Windows 10 upgrade on the last day. My Windows 10 usually boot from SSD within 30 seconds. Now it takes almost 10 minutes just to get to the login screen. Already tried the following fix with no success.

Quick Navigation :

2 Cases: Windows 10 System Restore Stuck

System Restore is a Windows features used to revert the computer's state (system files, Windows Registry, settings, installed applications) to a previous point in situations of malfunctions or other problems.

Various problems can be encountered during the system restore process; one of the more common ones is the task being frozen even when you try to interrupt it.

How long does System Restore take on Windows 10/7/8? Usually, the operation would complete within 20-45 minutes based on the system size but certainly not a few hours.

If you run Windows 10 and start System Restore in System Protection, you might get stuck on the following screen, saying:

'Please wait while your Windows files and settings are being restored

System Restore is initializing'.

In another situation, you might try to perform a restoration in WinRE. Again, Windows System Restore is stuck on restoring files.

So what to do when a system restore in Windows 10 gets stuck?

The following sections are some possible methods for fixing the issue of System Restore taking forever to complete.

Tip: In addition to system restore stuck issue, you may encounter a system restore error Windows 10, for example, system restore failed 0x80070057, 0x80042302, etc., Windows cannot find a system image on this computer.

How to Fix Windows 10 System Restore Stuck

Since there are a lot of discussions on this topic on the internet, we have compiled a list of useful solutions for you to try one by one.

① Perform System Restore in Safe Mode

If your system is stuck on the initializing screen or file restoring, the first thing to do is still to wait for a while especially if the restore point contains a lot of data.

However, if Windows 10 System Restore freezes for more than an hour, try forcing a shutdown, restarting your computer and checking for the status.

If Windows still returns to the same screen, try fixing it in Safe Mode using the following steps.

Step 1: Prepare an installation disc. Go to the Microsoft website on another working computer, download Windows 10 tool and create an installation disc. In addition, you can also create a repair disc or repair drive.

Step 2: Insert the created media into your computer and change the boot order to boot the computer from the media.

Step 3: Select Repair your computer on the Install Windows screen to enter WinRE (Windows Recovery Environment).

Tip: If this screen does not appear, your PC might not be set up to boot from a drive. Check your PC manufacturer's website for information on how to boot from media, and then try again.

Step 4: Go to Choose an option > Troubleshoot > Advanced Options > Startup Settings > Restart.

Step 5: Press F6 to select Enable Safe Mode with Command Prompt to run System Restore.

Step 6: Choose an account and enter the password.

Step 7: Type rstrui.exe in the pop-up Command Prompt window and press Enter.

Step 8: Now you can start System Restore in Safe Mode.

This should effectively fix the issue of Windows 10 System Restore stuck. However, if System Restore still freezes upon initializing or restoring files, try the next solution.

② Run Startup Repair

Can I stop system restore Windows 10?

You can force a shutdown to stop the system restoration process in order for your computer to run normally again upon reboot. Nevertheless, the issue of System Restore hung up on initializing still appears when you run it.

One of the possible reasons is that the boot manager is corrupted. In this case, you can simply fix it by through Startup Repair.

To do this, enter WinRE. Then, go to Choose an option > Troubleshoot > Advanced Options > Startup Repair.

Try the next solution if this doesn't work with the issue Windows 10 System Restore stuck.

③ Run SFC

System File Check (SFC.exe) is a Windows utility that helps you scan for corruptions in Windows system files. It will try restoring any corrupted files found.

If the System Restore taking forever Windows 10 issue happens, it is likely that certain files are damaged.

Here, run System File Check to scan Windows and check if it helps.

  1. Enter WinRE by using an installation disc, just like the first method.
  2. Navigate to Choose an option > Troubleshoot > Advanced Options > Command Prompt.
  3. Choose an account and enter the password.
  4. Type sfc /scannow in the pop-out window and press Enter to troubleshoot missing or corrupted system files on Windows 10.

Please wait patiently until the verification reaches 100%.

After the verification is done, run a System Restore again to see whether it is still stuck on restoring files or initializing.

In addition to these three solutions, some users suggest performing a full system virus scan using Windows Defender to ensure that the PC is free from virus, or running the disk cleanup and then try performing a system restore. These solutions might also fix the issue of Windows 10 System Restore taking a long time.

Tip: In Windows 10, you might be in a loop of Windows being stuck at reset or restoring to a previous Windows version. Read these related articles for solutions:
How Can You Fix 'Restoring Your Previous Version of Windows'?
Here Are Three Ways to Fix Windows 10 Reset Stuck Issue!

Important:

It is easy for System Restore to get stuck on initializing or restoring files in Windows. When something goes wrong, it becomes impossible to restore your computer to a restore point. This is really annoying, but if you have an available backup, things will be easy.

Computer backup has been an issue of critical concern for many people. In case of system corruption or data loss, the backup can be used to quickly restore your system or data.

Compared to System Restore in Windows, backup is recommended since it is all-sided; Windows files, individual files, settings, applications, etc. can all be included in an image file.

As an advice, the following section will show you how to protect your computer via backup.

Best Alternative to Windows System Restore - MiniTool ShadowMaker

To protect your computer well, we highly recommend the free backup software, MiniTool ShadowMaker.

As the best free Windows System Restore alternative software, it easily finishes file, system, partition and disk backup in Windows 10/8/7.

It provides a flexible way to back up your PC with automatic backup, incremental backup and differential backup.

Most importantly, this free backup software is capable of creating bootable media with its Media Builder; it can be used to boot your crashed computer and perform a quick disaster recovery without taking hours like System Restore.

Universal Restore could be helpful for restoring the image to another computer with different hardware.

Download the Free MiniTool ShadowMaker 30-Day Trial Edition now to avoid Windows 10 System Restore stuck.

Backup Windows 10

See how to create a Windows backup:

Step 1: Run MiniTool ShadowMaker in Windows 10 to its main interface.

Step 2: In the Backup interface, specify the backup source and storage location.

By default, the system partitions are chosen in the Source section. To back up the entire system disk, use this section to choose all system disk partitions.

Usually, it is recommended to back up a computer to an external hard drive.

Step 3: Click Back up Now. The backup operation can be monitored in the Manage interface.

Tip: We suggest creating automatic disk backups using Schedule feature or differential/incremental backups using Scheme feature.

Related article:3 Types of Backup: Full, Incremental, Differential - MiniTool

Windows 10 System Image Recovery

How to restore Windows image from an external hard drive after the occurrence of accidents? See the guide.

Step 1: Create a bootable USB drive or CD/DVD with the Media Builder of MiniTool ShadowMaker. Change the boot order of your PC to boot from the media.

Step 2: MiniTool ShadowMaker will start running in WinPE. Go to the Restore page, and choose the system image or system disk image to start restoring.

Tip: If you can't see the backup you want in the list, use Add Backup to find and add one.

Step 3: Next, choose one backup version.

Step 4: Select volumes to restore from the backup file.

Note:All system related partitions need to be chosen, as well as mbr and Track 0; otherwise Windows 10 will be unbootable.

Step 5: Select the disk you want to restore the Windows image to. The original system disk is usually recommended. Note that the selected partitions will be overwritten during the recovery process.

Step 6: Wait for a few minutes for MiniTool ShadowMaker to perform the recovery operation.

In conclusion, MiniTool ShadowMaker safeguards your computer by making it easy for system backups and recovery. No more Windows 10 System Restore stuck on restoring files or initializing!

Don't want to experience System Restore taking forever Windows 10 issue? Get the best free backup software - MiniTool ShadowMaker NOW to keep your computer safe.

Further Reading: System Restore Point VS Windows Image Backup

In this article, we mentioned two concepts: System Restore Point and Windows image backup.

Although both of them can be used to restore the computer to a previous state, they are actually two very different things. So what are the differences?

Restore Point

A restore point is essentially a snapshot of the Windows registry, critical system files and driver files. It does not include users' personal files, pictures, audio, video files, and other files.

Consequently, without affecting any user data, a system restore reverts registry, system files and driver files back to where it was at an earlier date.

By default, the restore points are saved in the system partition.

Tip: It is very possible to lose some files after a System Restore. Read this post to learn how to get them back: Quick Recover Files after System Restore Windows 10/8/7 - MiniTool.

Window Backup Image

A backup image is a copy of the essentials - it could be everything on your drive or a selected portion like documents, pictures, music, etc. The 3 different types of backups are automatic, differential and incremental backups.

A recovery will recover the entire contents on the image file, which could be stored in an external hard drive like USB drive, NAS, etc.

To wrap it up, an image backup is a more all-around and flexible method compared to a restore point. Now, start creating a backup for your Windows 10 with the backup software, MiniTool ShadowMaker.

Final Words

Have you tried our solutions to fix the issue of Windows 10 System Restore stuck on restoring files or hung up on initializing? We will be glad to see your thoughts in the following comments area.

If you have any questions while using MiniTool ShadowMaker, please write an email to [email protected].

Windows 10 System Restore Stuck FAQ

Usually, it takes 20-45 minutes not a few hours to run a system restore.
  1. Perform a system restore or system image recovery
  2. Run Startup Repair by Windows repair disc
  3. Reinstall Windows 10
What happens if I interrupt System Restore Windows 10?
If you have waited a long time and you need to stop the system restore operation, you can force reboot the system but this may cause an unbootable system. If it doesn’t boot, interrupt the boot process three times and then Windows 10 will start automatic repair.
If System Restore takes too long and gets stuck on restoring files or hung up on initializing, the restore process may have gone corrupt or something has failed severely.
Languages: EnglishPortuguêsEspañolFrançaisDeutsch日本語

Summary :

Computer is getting stuck on the screen 'Getting Windows ready. Don't turn off your computer' every time you restart? Don't panic! Here are some effective fixes for the getting Windows ready stuck issue in Windows 10/8, as well as a fast disaster recovery solution.

Quick Navigation :

Windows 10 Stuck on Getting Windows Ready

For many Windows 10 and Windows 8 users, it is common to experience unexpected issues with their operating systems. An issue that a lot of them encounter is their computer like Surface Pro 4 getting stuck on a loading screen with a message saying 'Getting Windows ready. Don't turn off your computer', as shown in the following figure:

Users report this issue on forums like Reddit, saying it often happens when they are trying to turn on, turn off or restart/reboot their computers or install Windows operating system.

  • Getting Windows ready boot loop, restarting loop, infinite loop, update loop
  • Windows 10 update stuck on getting things ready
  • Windows 10 install stuck at getting ready

How long does it take for Windows 10 to be ready? In some cases, this process could take more than several hours, which may prove to be a nuisance for many users.

If you also run into the Windows 10 stuck in loop getting Windows ready issue, here we will provide you effective solutions.

Quick Video Guide:

How to Fix Getting Windows Ready Stuck

Simply restarting the computer is often insufficient to get rid of Windows 10 getting ready loop. Fortunately, here are five workarounds you can try out below.

Solution 1: Simply Wait for Some Time

Yes, you read that right. The easiest working fix is to wait for some time. This is actually the method that some of Microsoft's support technicians advise.

When you are prompted with the message 'Getting Windows ready don’t turn off your computer', your system may be processing some tasks in the background such as downloading and installing files, starting a Windows 10 update process, modifying settings of the applications and modules, etc.

The system may take some time to complete these tasks depending on the number of programs installed on your PC. Thus, to let your computer boot properly, the first thing you can do is to wait until the system tasks are finished.

Usually, it is recommended to wait patiently for about 2-­3 hours. However, if you still see the screen, you should try other solutions to troubleshoot getting Windows ready Windows 10 loop.

Solution 2: Shut Down Your PC and Power Reset It

Power resetting your PC can clear all the information in the memory, but this won't damage the disk data. This method could help fix certain corruption issues on the computer.

Therefore, power resetting your Windows might fix the getting Windows ready stuck issue.

Here are the instructions to get Windows out of the update loop:

Step 1: Turn off your PC by pressing the power button.

Step 2: Disconnect all peripheral devices including USB flash drives, external hard drives, earphones, etc. Also, unplug the power cable or adapter from your PC.

Step 3: If you are using a laptop and the battery is detachable, remove the battery from the battery compartment.

Step 4: Press and hold the Power button on your computer for about 30 seconds to drain all the remnant charge from the capacitors.

Step 5: Connect the power cable back to the PC or insert the battery into your laptop. However, don not re-plug any of the USB devices.

Step 6: Press the Power button to boot your PC. You can now check whether the Windows 10 stuck in loop getting Windows ready issue is solved.

Solution 3: Perform a System Restore or System Image Recovery

If you have created a System Restore point or system image backup with Windows snap-­in tools, you can try using the restore point or image file to restore the PC to a normal statewhen you encounter the getting Windows ready stuck issue.

But how do you perform restoration when your system is stuck on the same screen?

Step 1:Download Media Creation Tool from the Microsoft website. Run it to create a Windows installation media (USB installation drive or CD/DVD disc).

Step 2: Boot the PC from the disc or USB drive. Configure the language, time, keyboard method, and click Repair your computer.

Step 3: Go to Choose an option > Troubleshoot > Advanced options > System Restore.

Step 4: Follow the wizard to finish a system restore to get you out of the Windows 10 getting ready loop.

If you have a system image, choose System Image Recovery under the Advanced options tab. Then, restore your computer to its earlier state using the image backup.

Tip: If you have a system backup created by the professional Windows backup software, MiniTool ShadowMaker, you can also use its Media Builder to create bootable media to restore the PC to an earlier state in WinPE. This post How Do You Restore System Image from External Hard Drive will be helpful to you.

Solution 4: Run System File Checker

If Windows is taking too long to get Windows 8/10 ready or the above methods fail to troubleshoot stuck at getting Windows ready, you can try the System File Checker tool. Sometimes Window's need to get ready for update at every reboot may be caused by the corrupted files on your computer.

Here is how to fix damaged system files:

Step 1: In the same way as above, insert the installation disc or USB drive into your PC and boot it from this drive.

Step 2: Go to Repair your computer, enter the Choose an option screen and choose Troubleshoot.

Step 3: Click Command Prompt in the Advanced options page.

Step 4: After cmd window is opened, type the command: sfc /scannow and press Enter on the keyboard.

Tip: Sometimes System File Checker might run into error messages like 'Windows resource protection could not perform the requested operation' or 'Windows Resource Protection could not start the repair service' in the cmd window. To solve these errors, read Quickly Fix – SFC Scannow Not Working (Focus on 2 Cases) to find solutions.

Wait patiently until the verification process 100% completes. Then reboot the computer to see whether getting Windows ready Windows 10 loop still exists.

Minutes

Solution 5: Perform Windows 10 Startup Repair

When your PC is stuck in getting Windows ready every reboot, performing Windows Startup Repair might be able to fix the issue.

This also requires entering the Windows Recovery Environment (WinRE) using the Windows installation disc. In WinRE, navigate to Advanced options and choose Startup Repair: Fix problems that keep Windows from loading.

Windows Automatic Repair not working! Read this post to find how to solve Windows couldn't load correctly and Automatic Repair couldn't repair your PC.

If the repair process results in the error 'startup repair couldn’t repair your PC' or 'automatic repair couldn’t repair your PC', try another solution to fix Windows 10 stuck on getting Windows ready issue.

Solution 6: Uninstall Recently Installed Update in Safe Mode

An erroneous recent update might confuse Windows to get stuck in another update loop, so uninstalling these updates may fix the issue. This will need to be done through the Safe Mode.

Step 1: Access the Advanced options page, then click Startup Settings and press F4 to access the computer Safe Mode.

Step 2: In Windows 10 Safe Mode, right­-click Start to choose Control Panel. Then go to Programs and Features.

Step 3: Click View installed update in the left panel. Select the recently installed updates and uninstall them to fix the Windows 10 stuck in loop getting Windows ready issue.

Finally, restart Windows 10 and the computer stuck on getting Windows ready issue should be solved.

Solution 7: Perform a Clean Windows Installation

If none of the above methods can help you out of getting Windows ready stuck issue, the operating system may have unfixable issues. The final solution will be installing a fresh copy of Windows.

Back up Important Files before Windows Installation

Windows clean install will erase some of your personal files. Thus, make sure you have backed up important data from the system partition or the Desktop. Also, have your license key ready.

To back up computer files, we recommend using the free Windows 10 backup software, MiniTool ShadowMaker. It is compatible with Windows 10/8/7 and can help you to back up files, disk, partition or OS with simple clicks. Here, you can start backing up your files by getting its Trial Edition (30­-day free use is supported) from the button below.

Step 1: Run MiniTool ShadowMaker Trial Edition.

Step 2: Under the Backup tab, go to Source > Folders and Files to choose the files you want to back up.

Then, select a destination path to store the backup image file. This software specifies a folder for you by default, but you can also specify a location like an external hard drive or USB drive.

Step 3: Click Back up Now to execute the backup task.

Perform a Clean Windows 10 Install

After finishing the file backup, now you can reinstall your Windows 10 to fix getting Windows ready stuck issue.

Step 1: Boot your computer from an installation disc or drive.

Step 2: Choose the language, time format, and keyboard.

Step 3: Click Install now and follow the instructions on the screen.

Note: Keep in mind that you should select the correct drive to perform the installation. Otherwise, all files from that drive will be removed. Be extra cautious.

After the setup process is complete, the problem Windows 10 stuck on getting Windows ready should be completely resolved.

If you are unsure of how to make a refresh copy of Windows, read How to Reinstall Windows 10. If you think it is complicated to make a clean install, you can follow this post to reset Windows 10 instead.

Suggestion: Back up Windows 10 OS to Safeguard Your PC

Regardless of what system issues occur on your computer, system image recovery is a better solution provided that a system image was created beforehand.

Similarly, restoring the PC to a previous state by using the system backup is also a good solution to Windows 10 getting ready loop for a long time

Therefore, after finishing fixing the issue, it is necessary to back up your OS to protect your computer from system corruption. To do this, we highly recommend using MiniTool ShadowMaker as mentioned above.

Step 1: Launch this backup software for Windows 10, click Keep Trial and Connect in This Computer section.

Windows 10 Download Been At 11 For 30 Minutes 2

Step 2: Go to the Backup page; system partitions and storage path are selected by default. Start the system backup process by clicking Back up Now.

Windows 10 Download Been At 11 For 30 Minutes Video

Tip: You can also change the backup source and destination location based on your needs.

Bottom Line

Is your computer stuck on getting Windows ready? Take it easy and use the above methods! In case getting Windows ready stuck occurs again, it is best to back up your Windows 10 operating system with MiniTool ShadowMaker.

Overall, feel free to tell us if you have other ways to fix Windows 10 getting ready loop or questions regarding MiniTool software by contacting [email protected] or leaving a comment below.

Getting Windows Ready Stuck FAQ

What do I do if my computer is stuck on getting Windows Ready?

Windows 10 Download Been At 11 For 30 Minutes 1

  1. Simply wait for some time
  2. Shut down your PC and power reset it
  3. Perform a system restore or system image recovery
  4. Run System File Checker
  5. Perform Windows 10 Startup Repair
  6. Uninstall recently installed update in Safe Mode
  7. Perform a clean Windows installation
Usually, you can wait patiently for 2-3 hours. But if you still see the computer screen after that period, try some ways to get rid of the getting Windows ready loop.
If your computer is stuck on the screen saying “Getting Windows ready. Don't turn off your computer”, try to fix it by running SFC, performing Startup Repair, running a system restore, etc.
  1. Remove Any USB Peripherals
  2. Run Windows Update Troubleshooter
  3. Rename SoftwareDistribution Folder
  4. Perform a Clean Boot
  5. Uninstall the Particular Update Causing the Issue
  6. Run DISM in Safe Mode
  7. Run Automatic Repair
  8. Perform System Restore in WinRE
  9. More details in the post - How to Fix the “Windows Updates Stuck at 100” Issue on Windows 10